How to use the ultrasonic cleaner

- 2021-08-06-

Ultrasonic cleaning machine is currently internationally recognized as the best ultrasonic cleaning equipment for cleaning. The ultrasonic cleaning machine uses the principle of ultrasonic cleaning to be simple and fast.

How to use the ultrasonic cleaner? The following is an introduction to the use of ultrasonic cleaners to let you know more about ultrasonic cleaners.

How to use the ultrasonic cleaner method steps:

1. Put the items to be cleaned into the cleaning basket of the washing machine, and then put the cleaning basket into the cleaning tank. Do not put the items directly into the cleaning tank to avoid damage to the equipment and cleaning effect.

2. According to different products or cleaning effects, pour the cleaning solution, water or aqueous solution in proportion, the minimum water level shall not be less than 60mm, and the maximum shall not exceed 80mm.

3. Connect to the 220V/50Hz power three-core socket, and turn on the power.

4. Turn on the switch button of the ultrasonic cleaner, and the green switch lights up to indicate normal operation.

5. Turn on the temperature control of the ultrasonic cleaning machine to adjust the temperature in accordance with the cleaning requirements of the items.

6. The temperature indicator light goes out. When the heater reaches the required requirement, the heater will stop working. If the temperature is lower than the set temperature, the heater will continue to heat automatically.

7. When the heating temperature reaches the product cleaning requirements, the cleaning timer can be turned on, and the working time of the timer can be set according to the product cleaning requirements.

8. The cleaning of general items takes 10 minutes to 20 minutes. For workpieces that are difficult to clean, the cleaning time can be appropriately extended to ensure the cleaning effect.

9. The timer position can be adjusted arbitrarily within 1-20min, and it can also be adjusted in the normally open position. Generally, the cleaning time is 10~20min. For parts that are particularly difficult to clean, the cleaning time can be appropriately extended.

10. After cleaning the cleaning tank, take out the cleaning basket and wash it with warm water or rinse it in another warm water cleaning tank without solvent.

11. After the items are cleaned, they should be dried, stored and assembled.

The above is an introduction to the usage of the ultrasonic cleaning machine. The specific usage depends on the type of your cleaning machine.